Admix AC471

Set Accelerating Admixture for Concrete and Mortar


ADMIX AC471 is a cement set accelerator which is supplied in powder form. This product is used where high early strength or quick setting time is required in concrete or cement slurry. The product may be mixed with ready to used aggregates before spraying in dry shotcrete system. Upon adding water at the nozzle, the accelerator reacts and causes rapid setting. 

Recommended usage

ADMIX AC471 can be used where high early strength or thicker layers of sprayed concrete is the aim:
–  Temporary or permanent supports in tunneling or underground constructions.
–  Rock stabilization in road working and mines.
–  Slurry injection in soft grounds.
–  Slope stabilization.
–  Injection of normal and foamed slurry as back filling in TBM excavation.

Technical Specifications

Appearance: White powder
Bulk density: Approx. 0.9 g/cm³
pH: 13 -14
Chloride content: < 0.1% w/w

Applications notes

It is always recommended to use fresh cement, old cements may affect setting properties of concrete. The product is compatible with all types of cement. Use of Portland cement type 2 is recommended as it has faster setting time comparing to others such as Sulphate resistance or Pozzolanic cements. ADMIX AC471 has good reaction with mixed cements containing fly ash and slags, but trial is advised before batching for determining setting time and 24 hours compressive strength.

Mix design

In dry shotcrete mix design containing ADMIX AC471 as accelerator, water cement (total cementitious materials) ratio should be less than 50% or even less than 45%. When high early strength is the aim, water cement ratio of 40% or less should be considered. Lower water cement ratio causes faster setting time, less accelerator consumption and thicker layer applications.


Proper dosage can be determined by trials for each project and can’t be generalized to other projects. Tested dosage is between 2 to 7 percent of cementitious materials depending of expected setting time, type of cement and water cement ratio.


ADMIX AC471 is supplied in 25 kg PP bags.



This product must be stored in original bags under cover, shelf life is 12 months. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging. For specific storage condition contact White Damavand Technical Services Department.

Safety awareness

ADMIX AC471 contains alkali materials. Use personal safety devices such as gloves, goggle, mask and safety dresses. In case of any contact with eyes or skin, wash it immediately with water for 15 minutes and get medical helps.

Quality approval

All materials produced in White Damavand Co. are under strict control of QC department and meet the requirements of international standards.

For additional information, contact company’s specialists in Tehran at: 88678881-3 or email address: